KSB Industrial Pumps

Amarex IN, KRTU - Sewage Submersible Mud Pump

Single stage, submersible, centrifugal pumps of closed coupled (monobloc) construction. Amarex IN pumps are suitable for handling waste water transport, storm water transport, waste water treatment etc. KRTU pumps are suitable for handling municipal and industrial waste water. 3 types of impellers available to suit a variety of needs – E (single vane), K (non-clog two channel) & F (free flow) in transportable and stationary installation.

• Pump Size 65 & 100 mm
• Capacity up to 200 m /hr
• Head up to 49 m
• Motor Rating up to 9.5 kW
• Temperature up to 80 C
• Speed up to 2900 rpm

Applications:

• Waste water transport
• Storm water transport
• Waste water treatment
• Sludge treatment

Easy and straightforward installation
Re-usable and polarised cable entry with KSB plug connection ensures correct installation.

Marked cut in energy costs
Thanks to optimised hydraulic system and higher efficiency.

Absolutely reliable and non-clogging
Thanks to optimised cutter (S-type impeller). Also features new additional hydraulic system(D-type impeller) specially designed for fluids with high solids content and sludges.

No risk of leakage
Close-coupled pump design prevents leakage

Unrivalled flexibility
The standard model can easily handle normal fluids and fluids with slightly abrasive or corrosive characteristics. Beyond this we are glad to incorporate any specific requirements regarding cable quality, coatings and mechanical seals.

Minimum inventory costs
single set of wear part replacements for all pump sizes and variants.

Amarex – Sewage Submersible Pump Brochure

KRTU – Sewage Submersible Pump Brochure

Movitec B - Vertical High Pressure Inline Multistage Pump

Multi-stage, vertical inline highpressure centrifugal pumps in ringsection design. Suitable for general water supply, sprinkling, irrigation and pressure boosting systems, warm water, hot water and cooling water re-circulation, boiler feed systems, domestic water supply systems and washing plants.

• Pump Size 2, 4, 6, 10, 15, 25, 90
• Capacity up to 112.8 m3/hr.
• Head up to 225 mtrs.
• Pressure up to 40 bar
• Temperature -20 to 140’C
• Speed up to 3600 rpm

Applications :

• RO Plants
• Irrigation systems
• Washing plants
• Pressure boosting
• Industrial plants
• Water supply systems
• Heating, ventilation and
• air-conditioning systems
• Marine applications

Energy-efficient
Higher efficiencies
Very low NPSH values
Maximum energy efficiency at full transparency of pump operation with PumpDrive

Horizontal, end suction, centrifugal, radially split volute casing pumps in back-pull-out design fitted with single stage radial impeller. Suitable for general water supply,sprinkling, irrigation, booster plants, circulation of warm, hot and cooling water, delivery of condensate and boiler-feed water and fire fighting applications. Pump Size DN 25 to 150 mm Capacity Q up to 660 m3/hr. Head H up to 160 m Discharge press. P up to 16 bar Temperature t -30 to 1400C Speed n up to 2900 rpm

Applications :
Pure liquids not chemically or mechanically aggressive to the pump materials.

• Water supply
• Cooling water
• Swimming pool water
• Fire-fighting systems/water
• Seawater
• Spray irrigation
• Irrigation
• Service water
• Cleaning agents
• Drinking water
• Brackish water
• Drainage
• Condensate
• Heating, air-conditioning
• Hot water

Etanorm SYT - Hot Oil Thermic Fluid Pump

• Head : Up to 102 m
• Size : 25 to 150 mm
• Capacity : up to 625 m³ / hr
• Speed : up to 3600 rpm
• Temperature : -30 to 350 degree C
• Discharge Pressure : Up to 16 bar

These Pumps are apt for Chemical, Petrochemical & Power generation applications. Horizontal, end suction, centrifugal, radially split, volute casing process pumps in back-pull-out design, fitted with a radial impeller. Suitable for heat transfer system, hot water circulation etc.

Applications :

• Heat transfer systems (DIN 4754, VDI 3033)
• Hot water circulation (DIN 4752)

Maximum operating reliability
– Highly effective venting contour ensures optimumventing.
– Confined gaskets.
– Design variant with double-acting mechanical seal in tandem arrangement.
– Anti-seize carbon plain bearing lubricated by the fluid handled.

MoviBoost – Hydro Pneumatic Pressure Booster System

Design

Made with the robust and proven German technology, moviboost, fully automatic systems are available in 3 variants – Kt, Vt & VPt. Systems can be built with 2 to 6 high pressure pumps (depending upon the requirement of water) and full electronic control of the required water supply.
Use of high quality material and manufacturing process ensures a hassle-free and reliable operation.

Applications

In building services, KSB pumps & KSB systems are employed in the following water supply applications :
• Residential buildings
• Hospitals
• Commercial buildings
• Hotels
• Fire fighting applications
• Airports
• Sports complex

Materials
Pump
Suction/Discharge casing : CI / Stainless Steel
Hydraulic System               : Stainless Steel
Mechanical Seal                  : EN 12756
Spring loaded ring              : Silicon Carbide
Seat Ring                              : Hard Carbon
Elastomers                           : EPDM

Hydraulic components
Manifolds : MS CED (Cataphoresis) or Galvanised

Valves
Ball Valve : Brass
Butterfly valve : MS/CI
Non return Valve : Brass / SS / CI

Operating Data (Standard Design)
Capacity Q : Up to 660 m3/hr.
Head H : Up to 160 m
Temperature : -20 C to +160 C
Discharge pressure : 10 & 16 bar
Supply voltage : 3 Phase, 415 Volts, 50 Hz
Drive : 2 Pole electric motor
(Higher pressure and flows are available on request)

A Standard System Contains
• 2-6 Vertical high pressure pumps (std. pumps)
• 1 check valve & 2 shutoff valves for each pump
• Pressure transmitter on discharge pressure side
• Pressure Indication via analog pressure gauge
• MS fabricated base plate
• Single control panel for controlling all pumps
• Suction and discharge manifolds

Features
• Fully automatic, user friendly hydropneumatic system.
• Energy efficiency – exceeds European Efficiency Value (MEI) for ErP (Energy Relating Products).
• Factory built system by KSB.
• BMS compatibility with Modbus ( RS 485) / Profibus / Lonbus / Bacnet etc.
• Siemens switchgears for reliable operation.
• Siemens / Danfoss VFD.
• Isolation transformer for controller.
• Controller power supply through dedicated SMPS.
• Input choke for VFD protection.
• Standard single phase protection.
• Standard phase reversal protection.
• Pump, header & valves designed for 16 bar rating.
• Standard maintenance-friendly easy access mechanical seal.

We manufacture and supply complete pump sets made as per local regulations and customer specifications.

Complete packages can be supplied (electric motor, diesel engine and jockey pump on one baseplate, with control cabinets, tank, batteries, etc.). This also includes the complete piping with discharge collector, valves and pressure switch.

All pump sets can be equipped with any type of fire-fighting pump and driven by either electric motor or diesel engine. The scope of supply also includes a control cabinet, batteries and a fuel tank. Commissioning, service and maintenance can be carried out by our qualified Service staff as an option.

Etabloc Horizontal End Suction Monobloc Pump Set

Compact, horizontal, end suction, centrifugal, radially split volute casing pumps in monobloc construction. Suitable for general water supply, sprinkling, irrigation, booster plants, circulation of warm, hot and cooling water, delivery of condensate and boiler-feed water and fire fighting applications.

Pump Size 25 to 150 mm, Capacity up to 640 m /hr., Head up to 160 m Discharge press, up to 16 bar Temperature -30 to 140 C, Speed up to 2900 rpm

Applications :
Pure liquids not chemically or mechanically aggressive to the pump materials.

• Water supply
• Cooling water
• Swimming pool water
• Fire-fighting systems/water
• Seawater
• Spray irrigation
• Irrigation
• Service water
• Cleaning agents
• Drinking water
• Brackish water
• Drainage
• Condensate
• Heating, air-conditioning
• Hot water

Design details

Design

â–ª Close-coupled design/in-line design

â–ª Single-stage

â–ª Horizontal/vertical installation

â–ª Rigid connection between pump and motor

Pump casing

â–ª Radially split volute casing

Impeller type

â–ª Closed radial impeller

Main applications

â–ª Heating systems

â–ª Air-conditioning systems

â–ª Cooling circuits

â–ª Water supply systems

â–ª Service water supply systems

â–ª Industrial recirculation systems

â–ª Swimming pools Fluids handled

â–ª Fluids not chemically or mechanically aggressive to the materials

Single stage, submersible, centrifugal pumps of closed coupled (monobloc) construction. KRT pumps are suitable for handling waste water transport, storm water transport, waste water treatment etc. KRTU pumps are suitable for handling municipal and industrial waste water. 3 types of impellers available to suit a variety of needs – E (single vane), K (non-clog two channel) & F (free flow) in transportable and stationary installation.

• Impeller type :  Non Clog

DN (mm)  : up to 350

Discharge (l/s)  : up to 900

Head (m) :  up to 60

0 Temperature of pumped media ( C) :  up to 40

Free passage (mm) :  up to 143

Speed (1/min) : 1450 or 960

Frequency (Hz) :  50

Voltage (V) :  415 (-15% +10%)

Power rating (kW) : 11 to 165

Applications:

• Waste water transport
• Storm water transport
• Waste water treatment
• Sludge treatment

SPbloc- Self Priming Monobloc Mud Pump

Horizontal self priming volute casing pumps, single stage with semi open impeller, in back pull out design. Monobloc, mono shaft design, hydraulics are assembled on extended motor shaft, suction lift up to 7 metres.
Technical specifications conforms to IS 8472 & IS 8418.
Performance Testing as per IS 11346.

Applications
Suitable pump for pumping
1. Muddy water, sewage, polluted liquids including solids etc.
2. Applications where priming & foot valve is to be avoided.

Industry wise Applications:
Industrial: Pumping petroleum products, chemicals, effluents, Sewage, ash-water etc
Mobile Machinery: Cooling water for marine engines & showels.
Tiles & Marble industry: for handling waste water.
Civil Construction: De-watering foundation, trenches and pits.
Public utilities: Sewage pumping.
Marine: Pumping water from docks, ports, vessels.

SPNorm-SPbloc – Self Priming Mud Pump Brochure

SPbloc- Self Priming Monobloc Mud Pump

Horizontal self priming volute casing pumps, single stage with semi open impeller, in back pull out design. Monobloc, mono shaft design, hydraulics are assembled on extended motor shaft, suction lift up to 7 metres.
Technical specifications conforms to IS 8472 & IS 8418.
Performance Testing as per IS 11346.

Applications
Suitable pump for pumping
1. Muddy water, sewage, polluted liquids including solids etc.
2. Applications where priming & foot valve is to be avoided.

Industry wise Applications:
Industrial: Pumping petroleum products, chemicals, effluents, Sewage, ash-water etc
Mobile Machinery: Cooling water for marine engines & showels.
Tiles & Marble industry: for handling waste water.
Civil Construction: De-watering foundation, trenches and pits.
Public utilities: Sewage pumping.
Marine: Pumping water from docks, ports, vessels.

SPNorm-SPbloc – Self Priming Mud Pump Brochure

Horizontal High Pressure Multistage Pump- WK, WL, WKS, WKFI

• Head up to 780 m
• Pump Size 40 to 150 mm
• Discharge Pressure up to 63 bar
• Speed up to 4500 rpm
• Capacity up to 630 m3 /hr
• Temperature up to 230-degree C

These pumps are apt for Chemical, Petrochemical & Power generation applications. Horizontal, radially split, a ring section, high-pressure multi-stage pumps with radial impellers. Suitable for water works, irrigation, sprinkler, installations, boiler feed applications, condensate extraction, fire fighting and generating high-pressure water used in hydraulic presses and descaling plants.

WK – Horizontal Multistage Pump Brochure

Gamma – Horizontal Split Casing Pump

Main applications
 Waterworks
 Industrial utility water
 Water transport
 Irrigation pumping stations
 HVAC

Fluids handled
Gamma pumps are designed for pumping water and other
fluids with a low solids content. The pumps are very versatile
and can be used for the following fluids, for example:
 River water, lake and groundwater
 Stormwater
 Service water
 Cooling water

Design
 Volute casing pump
 Horizontal installation
 Single-stage
 Nominal diameter of the discharge nozzles: 80 mm – 350mm

Pump casing
 Axially split volute casing
 Volute casing with integrally cast pump feet
 Replaceable casing wear rings
 Mating dimensions to DIN EN or ASME

Impeller type
 Double-entry radial impeller

Pump shaft
 Shaft protecting sleeves in the seal area
 Modular shaft

Shaft seal
 Gland packing
 Mechanical seal

Bearings
 Grease-packed rolling element bearings sealed for life

Gamma – Horizontal Split Casing Pump Brochure

Applications :

For handling aggressive organic and inorganic fluids in

• § Chemical industry

§ Petrochemical industry

§ Process engineering

§ Sugar industry

§ Biodiesel, bioethanol

§ Fire-fighting systems /

§ fire-fighting water

§ Seawater desalination / reverse osmosis

§ Condensate

§ Hot water

§ Brine

§ Steel industry

§ Heat transfer media

§ Cleaning agents

Material options

Cast iron A48CL35

Cast steel A216GrWCB

Stainless steel A743GrCF8M

Duplex steel A995GrCD4MCuN

Special materials

Technical data

Flow rate Q : Up to 1.160 m /h (50 Hz)

Head H : Up to 162 m (50 Hz)

Operating temperature t : -30 C to +300 C

Operating pressure p : Up to 25 bar

• Horizontal, radially split, ring section, high pressure multi-stage pump with radial impellers.
• Suitable for water works, irrigation, sprinkler, installations, boiler-feed applications, condensate extraction, fire fighting and generating high pressure water used in hydraulic presses and descaling plants.